Xantech Programmable Controller was $623.81 now...
Xantech

Xantech Programmable Controller was $623.81 now...

$342.60 (excl GST)

The 590-10 gives the custom installer the ability to use any push button or contact closure to initiate infrared commands. The 590-10 incorporates 16 isolated input circuits and a learning microprocessor. There are 16 pairs of screw terminals on its rear panel for use with up to 16 individual contact closures.


FEATURES

  • Programmable with Universal Dragon Drop-IR™ Programming Software
  • Multi-function sequencing for up to 40 commands per key, button, or contact closure
  • Infrared output compatible with all Xantech brand IR control systems. Use 791-44 connecting blocks for emitter expansion
  • Memory: 8 Kbytes E2PROM
  • IR Carrier Frequency: 31.25 kHz to 71.50 kHz
  • Maximum Peak IR Signal Output Current: 100 milliamps
  • COM Port: RS232 Signal Compatible

 


SPECIFICATIONS

  • Inputs: 16 Opto-Isolators connected via 16 screw terminal pairs, each in series with a 1,000-Ohm resistor
  • Input voltage range, 5 to 30 VDC
  • 12 VDC is available on the 12VDC "+" and "-" screw terminals for driving inputs through external switch closures
  • Banks: One with extensive macro (sequence) capacity
  • Power In: 12VDC, 300mA. 2.1mm coaxial power jack, center positive. Requires Model 782-00 or 786-00 Power Supply
  • Memory: 8 kilobyte non-volatile E2PROM
  • IR Carrier Frequency: 31.25kHz to 71.50kHz
  • Dimensions/Weight: 8.5"W x 4.25"H x 2.875"D (216mm x108mm x 73mm) / 1.8 lbs (0.8 kg)

Full Description
Qty
  • Description

    The 590-10 gives the custom installer the ability to use any push button or contact closure to initiate infrared commands. The 590-10 incorporates 16 isolated input circuits and a learning microprocessor. There are 16 pairs of screw terminals on its rear panel for use with up to 16 individual contact closures.


    FEATURES

    • Programmable with Universal Dragon Drop-IR™ Programming Software
    • Multi-function sequencing for up to 40 commands per key, button, or contact closure
    • Infrared output compatible with all Xantech brand IR control systems. Use 791-44 connecting blocks for emitter expansion
    • Memory: 8 Kbytes E2PROM
    • IR Carrier Frequency: 31.25 kHz to 71.50 kHz
    • Maximum Peak IR Signal Output Current: 100 milliamps
    • COM Port: RS232 Signal Compatible

     


    SPECIFICATIONS

    • Inputs: 16 Opto-Isolators connected via 16 screw terminal pairs, each in series with a 1,000-Ohm resistor
    • Input voltage range, 5 to 30 VDC
    • 12 VDC is available on the 12VDC "+" and "-" screw terminals for driving inputs through external switch closures
    • Banks: One with extensive macro (sequence) capacity
    • Power In: 12VDC, 300mA. 2.1mm coaxial power jack, center positive. Requires Model 782-00 or 786-00 Power Supply
    • Memory: 8 kilobyte non-volatile E2PROM
    • IR Carrier Frequency: 31.25kHz to 71.50kHz
    • Dimensions/Weight: 8.5"W x 4.25"H x 2.875"D (216mm x108mm x 73mm) / 1.8 lbs (0.8 kg)

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: XT-59010
    Weight: 0.60 KGS
    Width: 9.00 (cm)
    Height: 23.00 (cm)
    Depth: 135.00 (cm)
    Shipping: Calculated at Checkout