The Vantage ELDS4-DIN, Dimming Station is a 4 channel dimmer that connects to the Vantage Control System. It is powered from a local line feed, and communicates with the system through the Vantage 2‑-wire station bus.
The Electronic Load Dimming Station makes dimming easier for both the homeowner and the installer. It is designed to easily install on standard 35mm DIN rail. These dimmers support trailing edge (reverse phase) dimming and will detect short circuits and shut down the load until the short circuit is cleared.
- Controls 4 electronic loads of up to 480 watts @ 240v
- Controls 2 electronic loads of up to 960 watts @ 240v
- Override / status indicators on facia
- Exclusively for electronic loads
| LOAD CONFIGURATIONS | Refer to install guide for full installation information |
| | | | | | | |
| ELDS-4-1-DIN | | | | | | |
| Max Watts per Load 960W @ 240V Attention: Not all channels can be used at max. load. See load configuration examples |
| | | | | | | |
| example 1 | | | | | | |
| LOAD CONFIGURATIONS | Load 1. MAX | Load 2. MAX | Load 3. MAX | Load 4. MAX | | |
| Normal Loads 240VAC | 480W | 480W | 480W | 480 | | |
| Expanded Loads 240VAC | 960W | Do Not Use! | Do Not Use! | 960W | | |
| | | | | | | |
| For proper heat dissipation: |
| Also see Expanded Example 2, below. |
| Expanded loads 1 plus, 2 or 3 plus 4 must not exceed 960W@240V |
| The Do Not Use! Loads, may be used, if combined loads 1 and 2 or combined loads 3 and 4 do not exceed the 960W limits and individual loads do not exceed the limits in the table. |
| | | | | | | |
| example 2 | | | | | | |
| LOAD CONFIGURATIONS | Load 1. MAX | Load 2. MAX | Load 3. MAX | Load 4. MAX | | |
| Normal Loads 240VAC | 480W | 480W | 480W | 480 | | |
| Expanded Loads 240VAC | 400W | 560W | 300W | 660W | | |
| | | | | | | |
LED DIMMING TESTING NOTES
TechStyle has tested the following products with the ELDS4-DIN with reliable results. Please note due to manufacturer product changes we cannot guarantee that any future iterations of the below products will work in the same manner as the item tested and so recommend that prior to purchasing a house load of LED bulbs that you carry out testing, or contact us so we can arrange that on your behalf. Some charges may apply.
LED fitting from ECC by Brightgreen with Brightgreen transformer model BG-010BSD.
Tested July 2017.
PHILIPS Corepro LED bulb. D 10-60w 827 E27.
Warm white, for trailing edge dimmer.
Tested July 2016.
Vantage Controls products may only be purchased by Certified Installers. If you would like more information about becoming a Certified Installer or would like pricing please contact sales@techstyle.co.nz
Download VC-ELDS4-1-DIN Spec Sheet
Read a Case Study about a Vantage home.
