
VANTAGE CONTROLS
Vantage LVRS8-DIN Low Voltage Relay Station - DIN
VC-LVRS8-DIN
In stock
The Vantage DIN Low Voltage Relay Station (LVRS8-DIN) is a powerful control point for systems or devices that operate through low voltage relay control, including eight SPDT relays for devices such as draperies, pumps, garage doors, lifts, screens, pool covers, sprinklers, baths and security systems. Each relay corresponds to an individual button on the front of the unit for manual switching, and the relays latch to retain the last state in the event of a power interrupt. The WireLink station clips easily onto standard 35mm DIN rails and communicates with the controller through a two-wire bus.
| Model | LVRS8-DIN (WireLink) |
| Dimensions (HWD) | 86mm × 157mm × 60mm (3.4" × 6.18" × 2.375") |
| Weight | 201 g (8.04 oz) |
| Mounting | 35mm DIN Rail (EN 50 022: 1977) |
| Number of SPDT Relays | 8 |
| Number of Relay Actuators | 8 |
| Maximum Current at Relay | 1 A |
| Maximum Voltage at Relay | 48 VAC / 30 VDC |
| Lightning Surge Protection Low Voltage | ITU-T K.20 |
| Station Equivalent InFusion | 0.5W on IC-24 / 0.5W on IC-36 |
| Station Equivalent QLink | 1 Station on QLink Main Controller |
| Software Requirements WireLink | InFusion Design Center or QLink version 3.5 or higher |
| Ambient Operating Temperature | 0°–40° C (32°–104° F) |
| Ambient Operating Humidity | 5–95% non-condensing |
| System Compatibility | InFusion, QLink |
| Warranty | 5-year limited (Vantage) |
No downloads available for this product.
No compatibility information available for this product.