VANTAGE CONTROLS
Vantage EasyTouch II ScenePoint Dimmer Station (WireLink, No Trim)
VC-DS10XE-01NA
Backorder
The EasyTouch II ScenePoint Dimmer Station is a wallbox dimmer that replaces a standard high-voltage wall switch and is powered by the local line feed for control of connected lighting loads. It connects to the Vantage system with two-way communication over the two-wire Station Bus (WireLink) for centralized control, and operates as an independent dimmer in default mode before programming or if communication is lost. This configuration is supplied with no buttons and no trim, ready to be completed with the appropriate EasyTouch II buttons and faceplate.
| Models | DSx-x (ScenePoint WireLink Dimmer Station) |
| Voltage | 120/240V ~ 60/50Hz |
| Weight | 2.9 oz / 82g (1-gang) |
| Load Types | Incandescent, Magnetic Low Voltage, forward phase Fluorescent dimming ballasts, non-dimmable fluorescent ballasts (relay mode only), Neon, Cold Cathode (lpf), and HID |
| Minimum Load Required | 15W |
| Max. Load (stations up to 3-gangs, default power profile) | Single gang = 5A (600W @ 120V) or 5A (1200W @ 240V) |
| Max. Load (4-gang stations, default power profile) | Single gang = 4.2A (500W @ 120V) or 4.2A (1000W @ 240V) |
| Arc Suppression | Zero Cross built-in arc suppression |
| Lightning / Surge Protection | MOV surge suppression; High Voltage meets IEEE C62.41 (6000V & 3000A); Low Voltage meets ITU-T K.20 |
| Cooling | None required |
| Status Indicator | Microprocessor Status |
| Safety Off Switch | Load by Load selectable |
| Station Bus Connections | 24V / 36V Station Bus |
| Station Dimensions | Height = 4.3" (109mm); Depth = 1.38" (35mm); One Gang Width = 2.5" (64mm) |
| Ambient Operating Temperature | 32 - 95°F (0 - 35°C) |
| Ambient Operating Humidity | 5 - 95% non-condensing |
| UL and CUL Listed | Yes |
| System Compatibility | InFusion (Design Center) / QLink |
| Warranty | 5-year limited (Vantage) |
No downloads available for this product.
No compatibility information available for this product.