Labor Saving Devices

Creep-zit replacement threaded bull nose connector pack

Creep-zit replacement threaded bull nose connector pack

$108.09 (excl GST)

LS-YFT30

$382.36 (excl GST)

If you can touch the wire with the pole, you can GRABBIT!
The Grabbit series of telescoping poles are constructed of non-conductive, lightweight, shockproof, friction locking telescoping fiberglass. The tool is indispensable for running (pushing or pulling) wires or cables through limited access areas and false ceilings. /n The Grabbit is designed for both residential and commercial installations. The tool includes our patented Z-tip wire ??grabber? tip. The inner V of the Z-Tip has a double knife edge designed to literally grab the wire insulation without cutting the actual metal wire, while the outer V (without knife edge) is designed to push a wire loop. Both the GR12 and GR18 now include a new handy snap-on light accessory included for seeing in dim lighting. Just snap on the LED light in dark applications, and snap it off when not in use. Replacement GRABBIT clip-on lights are available separately.

Product Notes
Lightweight construction make the Grabbit pole easier to use than other poles. Includes a clip-on LED tip light and new improved protective end-collars on each section.

Product Hi-Lite
Great for both commercial and residential attics and crawl spaces.

The Grabbit it available in two lengths:
The GR12 is made of three sections, and when collapsed is just under 55" and weighs less than 3lbs. When extended, the GR12 will reach to 12ft.
The GR18 has five sections and when collapsed is less than 58" and weighs less than 5lbs. When extended, the GR18 will reach to 18ft.

LSDi 12ft. Telescoping Grabbit was $272.65 now...

$149.73 (excl GST)

If you can touch the wire with the pole, you can GRABBIT!
The Grabbit series of telescoping poles are constructed of non-conductive, lightweight, shockproof, friction locking telescoping fiberglass. The tool is indispensable for running (pushing or pulling) wires or cables through limited access areas and false ceilings. /n The Grabbit is designed for both residential and commercial installations. The tool includes our patented Z-tip wire ??grabber? tip. The inner V of the Z-Tip has a double knife edge designed to literally grab the wire insulation without cutting the actual metal wire, while the outer V (without knife edge) is designed to push a wire loop. Both the GR12 and GR18 now include a new handy snap-on light accessory included for seeing in dim lighting. Just snap on the LED light in dark applications, and snap it off when not in use. Replacement GRABBIT clip-on lights are available separately.

Product Notes
Lightweight construction make the Grabbit pole easier to use than other poles. Includes a clip-on LED tip light and new improved protective end-collars on each section.

Product Hi-Lite
Great for both commercial and residential attics and crawl spaces.

The Grabbit it available in two lengths:
The GR12 is made of three sections, and when collapsed is just under 55" and weighs less than 3lbs. When extended, the GR12 will reach to 12ft.
The GR18 has five sections and when collapsed is less than 58" and weighs less than 5lbs. When extended, the GR18 will reach to 18ft.

LSDi 18ft. Telescoping Grabbit

$562.77 (excl GST)

LSDi 3' Luminous BUllnose Rod with Female Ends

$45.95 (excl GST)

LSDi 3ft Fiberglass Push/Pull Rod with Bullnose Connector

LSDi 3ft Fiberglass Push/Pull Rod with Bullnose Connector

$36.63 (excl GST)

These economical fiberfuse fiberglass rod pushers are fluorescent green in color and reflect light shined on them. The rods are .162? in diameter, flexible, yet retain memory to straight. These rods are simply fiberglass blanks with a ground flat end and a hole drilled through to attach wire and push. Available in 2ft., 3ft., 4ft., 5ft., & 6ft. lengths.

Product Hi-Lite
Our fiberglass rods are the original ??Glo Rods? first offered in 1986. We innovate what others imitate.

LSDi 6ft Fiberglass Wire Pusher

$47.46 (excl GST)

LSDi 6ft Luminous Fiberglass Push/Pull Rod with Bullnose Connector

LSDi 6ft Luminous Fiberglass Push/Pull Rod with Bullnose Connector

$103.76 (excl GST)

LSDi All-Tool-Mate Organiser Case was $413.43 now...

LSDi All-Tool-Mate Organiser Case was $413.43 now...

$227.05 (excl GST)

LSDi Base Boar-zit Kit with Fish Wire 7/16"(11mm)

LSDi Base Boar-zit Kit with Fish Wire 7/16"(11mm)

$538.01 (excl GST)

LSDi Connector Protector Pull Sleeve 3/4"

LSDi Connector Protector Pull Sleeve 3/4"

$64.77 (excl GST)

LSDi Creep zit tip 6ft x 1/8" male threaded pull sock

LSDi Creep zit tip 6ft x 1/8" male threaded pull sock

$64.77 (excl GST)

This kit is the luminous (glow in the dark) version of the standard Creep-Zit 30ft. kit above.
Product Hi-Lite
Glows in the dark!
This kit includes:
Four Luminous (glows in the dark) FiberFuse?½ 6ft. push/pull rods with male and female threaded connector ends
One Luminous (glows in the dark) FiberFuse 6ft. push/pull rod with a fixed bull nose end and a female threaded connector end
Whisk Threaded Connector Tip
Ball Chain Lanyard (12" length)
Kit is packaged in a clear square plastic tube

LSDi Creep-Zit 30ft Luminous Threaded Connector Wire Running Rod Kit

$437.16 (excl GST)

This kit offers the essential components needed for a wide range of installation applications.

Product Hi-Lite
Now Includes Our "NEW" Lighted Bull-Nose Tip at NO ADDITIONAL COST!

This kit includes:
Lighted Bull-Nose Threaded Connector Tip
Four FiberFuse?½ 6ft. push/pull rods with male and female threaded connector ends
One FiberFuse 6ft. push/pull rod with a fixed bull nose end and a female threaded connector end
Luminous Whisk Threaded Connector Tip
Ball Chain Lanyard (12? length)
Kit is packaged in a clear square plastic tube

LSDi Creep-Zit 30ft Threaded Connector Wire Running Rod Kit

$346.27 (excl GST)

LSDi Creep-zit 6ft Rod with Bullnose

LSDi Creep-zit 6ft Rod with Bullnose

$64.77 (excl GST)

These single rods allow you to replace lost rods or add length to your Creep-Zit Kits. Not compatible with RoyRods Quick Connect.

LSDi Creep-Zit 6ft. Rod with Threaded Male/Female Connectors

$64.77 (excl GST)

Creep-Zit?½ Compact 24ft. Kit - Threaded Connector Wire Running Rod Kit
This rod kit provides shorter 3ft. rods for more versatility and functionality in confined spaces and includes a soft case with handle straps that enable the kit to be carried like a arrow ??quiver? case on your shoulder.

This kit includes:
Seven FiberFuse?½ 3ft. push/pull rods with male and female threaded connector ends
One Luminous (glows in the dark) FiberFuse?½ 3ft. push/pull rod with a fixed bull nose end and a female threaded connector end
Whisk Threaded Connector Tip
Ball Chain Lanyard (12" length)
Premium nylon shoulder ??quiver? case with zippered tip pocket

LSDi Creep-Zit Compact 24ft Threaded Connector Wire Running Rod Kit

$315.27 (excl GST)

LSDi Creep-zit Drag-zit Magnet Male Threaded Connector Tip

LSDi Creep-zit Drag-zit Magnet Male Threaded Connector Tip

$64.77 (excl GST)

LSDi Creep-zit Luminous Whisk

LSDi Creep-zit Luminous Whisk

$48.76 (excl GST)

LSDi Creep-zit male threaded ball chain tip (3 pack)

LSDi Creep-zit male threaded ball chain tip (3 pack)

$56.11 (excl GST)

The Creep-Zit?½ threaded connector wire running rod system offers several specialized tips to meet your installation needs. We also provide replacement parts for your Creep-Zit?½ rods to help extend the life of your rod kits.
This tip provides a bendable 4" extension for your rod that can be bent at an angle or in an offset configuration, used when a straight rod would hang up.

LSDi Creep-zit Male Threaded Flex Tip

$56.11 (excl GST)

LSDi Creep-zit Male Threaded Screw Tip

$56.11 (excl GST)

This is our most advanced and best value threaded connector rod kit for running wire and cable.

This kit includes:
Five FiberFuse?½ 6ft. push/pull rods with male and female threaded connector ends
One Luminous (glows in the dark) FiberFuse?½ 6ft. push/pull rod with male and female threaded
connector ends
One 6ft. Fish Tailz?½ 1/8" Mesh Pull Sock
Whisk Threaded Tip
Ball Chain Threaded Connector Tip (12? ball chain length)
Female Bull Nose Threaded Connector Tip
Kit is packaged in a clear square plastic tube

LSDi Creep-Zit Pro 36ft Threaded Connector Wire Running Rod Kit

$389.53 (excl GST)

LSDi Creep-zit Replacement Female Bullnose Ends (5-pack)

LSDi Creep-zit Replacement Female Bullnose Ends (5-pack)

$38.77 (excl GST)

LSDi Creep-zit Replacement Threaded Connector Pack

LSDi Creep-zit Replacement Threaded Connector Pack

$64.77 (excl GST)

LSDi Creep-zit Replacement Threaded Male Bullnose End

LSDi Creep-zit Replacement Threaded Male Bullnose End

$56.11 (excl GST)

A Complete Tip Kit and Case for Your Creep-Zit System!
This kit contains a wide range of specialized threaded connector tips for your Creep-Zit?½ system. The kit is intended to complement your Creep-Zit Pro 36 ft. Push/Pull Rod Kit (Model CZP36), the Creep-Zit 30ft. Rod Kit (Model CZ30 or CZ30L) or the Creep-Zit 24ft. Compact Rod Kit (Model CZ24) by adding multiple specialty tips to meet a wide range of installation challenges.

The kit includes the following components:
Creep-Zit Threaded Z-Tip (for secure wire retrieval)
Creep-Zit Threaded J-Tip (for pushing or lay-up)
Creep-Zit Threaded Ceramic Magnet Retrieval Tip
Creep-Zit Threaded Magnetic Locating Tip and Compass
Creep-Zit Threaded Ball Chain Tip
Creep-Zit Threaded Flex Tip
Creep-Zit Threaded Screw Tip
Creep-Zit Male Bull Nose Tip
Creep-Zit Female Bull Nose Tip
??Piggy-Back? tip storage case

LSDi Creep-zit Threaded Connector Premium Tip Kit

$266.83 (excl GST)

LSDi Creep-zit Threaded Lighted Bullnose Tip

$43.24 (excl GST)

LSDi DeCoil-Zit Wire Reel Holder 508mm diameter

LSDi DeCoil-Zit Wire Reel Holder 508mm diameter

$160.04 (excl GST)

LSDi DeCoil-Zit Wire Reel Holder 635mm diameter

LSDi DeCoil-Zit Wire Reel Holder 635mm diameter

$160.04 (excl GST)

The Directional Tool permits you to hold, control and guide flexible shaft drill bits and extensions into wall cavities and other confined spaces. Place the tool over your flexible drill bit shaft and arc your bit into the proper angle of attack before drilling your hole. Made of hardened 1/4" steel and welded construction, our directional tool is finished with a durable and attractive powder coating for years of reliable, trouble free service.

Product Hi-Lite
This tool is recommended when using any of our flexible drill bit extensions.

LSDi Directional Tool for Flexi Bits

$58.73 (excl GST)

LSDi Fish Tail Pull Socks

LSDi Fish Tail Pull Socks

$282.47 (excl GST)

LSDi Flexi Freeform Extension Bit

LSDi Flexi Freeform Extension Bit

$112.67 (excl GST)

LSDi Grabbit Mini

LSDi Grabbit Mini

$164.48 (excl GST)

LSDi Heavy Duty Magnet Tip

LSDi Heavy Duty Magnet Tip

$64.50 (excl GST)

LSDi J Tip Male Threaded Connector Tip

LSDi J Tip Male Threaded Connector Tip

$47.46 (excl GST)

LSDi Premium Freeform Bit 1/2" x 72" (12.7mm x 1828mm)

LSDi Premium Freeform Bit 1/2" x 72" (12.7mm x 1828mm)

$97.97 (excl GST)

LSDi Premium Freeform Bit 3/8" x 48" (1.2m)

LSDi Premium Freeform Bit 3/8" x 48" (1.2m)

$98.37 (excl GST)

LSDi Premium Freeform Bit 3/8" x 72"

LSDi Premium Freeform Bit 3/8" x 72"

$93.06 (excl GST)

LSDi Premium Freeform Masonry bit 3/8" x 36"

LSDi Premium Freeform Masonry bit 3/8" x 36"

$89.57 (excl GST)

Professional installations demand accuracy. The EZ-CUT?½ Template and Level is a template for cutting out single or double gang boxes and includes integrated vertical and horizontal leveling vials to assure you are positioning your box in a perfectly level position. This lightweight tool makes your cuts accurate and eliminates the frustration of using a separate level for your gang box installations.

Product Hi-Lite
Place your electrical boxes straight the first time.

LSDi Professional Level and Template Tool

$56.11 (excl GST)

LSDi Wall Eye Mini

LSDi Wall Eye Mini

$109.53 (excl GST)

Rebore-zit 3/8" with 1/4" pilot

Rebore-zit 3/8" with 1/4" pilot

$151.40 (excl GST)

The Reference Point Bit is an extremely small (0.047" diameter) wire bit for preliminary identification of drill bit path. Made of 36" long spring wire, this bit can be cut at an angle and any length to make the smallest ??reference? bit. Packaged as a convenient 10-pack.

Reference bits (10-pack)

$47.46 (excl GST)

Roy Rod 6 ft

$60.24 (excl GST)

Screw and connector bag

Screw and connector bag

$86.40 (excl GST)

For ultimate accuracy and leverage, shoot the yoke horizontally.
The Sling-a-Line?½ is the original span caster first introduced in 1982 by Labor Saving Devices Inc. Other manufacturers have tried to imitate it, but none offer the versatility in range and the retro feel of the original. The Sling-A-Line has a beautiful birch wood yoke with 10lb. test fish line to accommodate most wire pulls. Simply depress the caster reel, pull back the surgical tubing strap with the lead weight and shoot. The sling-shot action allows you to vary your range from 10ft. to over 100ft. Attach your wire or a pull cord and pull it back to you.

Product Hi-Lite
Eliminates multiple ceiling tiles & ladder movements!

Sling-a-line span caster

$129.72 (excl GST)

One of the Installers?? Most Valuable Tools!
Accept no inferior knock-off products - use the original - the Wet Noodle Retriever System. LSDI developed the ball chain and retriever concept to help save installation time. Since its introduction, it has evolved into a ??must have? tool for retrofit installation. The Wet Noodle Retrieval System has been updated to now contain three components: a 24" flexible insulated retriever with an ultra strong earth magnet attached at one end; 10ft. of lightweight ball chain with a stop-ring; and an 18" telescoping pocket retriever. This system provides a fast and easy solution to connecting an in-wall entry point to an exit point blindly (without vision tools) to pull wire.

Product Hi-Lite
NEW Larger more Powerful 1/4" magnet has been added to the opposite end of the original 3/16" Neodymium magnet for extra pulling power!

Wet Noodle and Retrievers

$97.70 (excl GST)

Z Tip Male Threaded Connector tip

Z Tip Male Threaded Connector tip

$60.47 (excl GST)

Shopping Cart

Your cart is empty.