Autonomic Mirage M-120e
Autonomic

Autonomic Mirage M-120e

AC-M-120E
$1,604.35 (excl GST)

M⋅120e Four-room Mirage Digital Amplifier

The M-120e Mirage Digital Amplifier supports four rooms of audio at 30 Watts per zone. Its smaller form factor offers flexibility with placement of the unit, enabling installation into a structured wiring enclosure or wall mounting. The M-120e provides simultaneous amplification for two local source inputs or two eAudioCast™ network streams in as many as 96 rooms.

Wired with a simple Cat5 connection, the M-120e can be placed throughout the home or accessed wirelessly when used with the MMS-1e Mirage Music Streamer.
High-resolution Support All eSeries amplifiers support proprietary Autonomic eAudioCast™, enabling high-resolution audio (HRA), up to 24-bit/192kHz, over Ethernet. Place amplifiers, servers, and legacy source components anywhere in a residence and connect all components to the audio network with a single Cat5 cable at high resolution bit depths.
Installation Flexibility The small form factor, eAudioCast technology, and the included mounting accessories afford installers with maximum flexibility in placement. The M-120e can be mounted on a wall near zone speakers, or in a structured wiring cabinet. Distributed eSeries components stream audio and control signals through the home network using a single Cat-5 connection to a router or switch.
Virtually Unlimited Zones Multiple eSeries amplifiers can be utilized in any combination on a single network to support up to 96 zones of high-resolution audio with network-wide grouping capabilities.
Flexible Control Options Control using the Mirage Media Controller application for iOS and Android devices; also, eSeries audio systems are fully compatible with the rich library of pre-programmed control system modules for all major automation platforms.
Mirage eSeries Ecosystem The Mirage ecosystem is capable of handling up to 144 audio sources and 32 simultaneous eAudioCast streams, including high-resolution audio digital streams and local sources on a single network.
Rated Output Power, All Channels 15W per channel @ 8Ω load
Total Harmonic Distortion (THD) < 0.1% (10 Watt, 8Ω load)
Speaker Impedance (Z1-Z4) 4Ω–8Ω
Input Sensitivity and Impedance (S1) 0.72V / 22KΩ
Balanced Audio 0.72V / 680Ω
Frequency Response 20Hz–20kHz
Tone Control ±12dB, 100Hz (Bass) ±12dB, 10kHz (Treble)
Signal-to-noise Ratio 96dB (IHA-A, 1V input / unbalanced)
Source Outputs (2) local source outputs; Digital Output1 mirrored to Zone1; Digital Output2 mirrored to Zone2; Impedance: 75Ω, 0.5V RMS
LAN Connection (1) 8-wire RJ45 with 2 LED indicators; 10/100 Mbits/sec BaseT Ethernet port; green LED indicated link status; yellow LED indicated Ethernet activity
Keypad Controllers (2) KP-6 in-wall keypad controller ports
Infrared Out (1) IR transmit for control of third-party devices; 3.5mm jack current limited to 25mA
Zones (4) Zones, expandable to 96 zones with additional supported Mirage amplifiers
Audio Adjustments Per zone adjustments for Bass, Treble, Balance, Loudness, Audio Delay (up to 600ms), Zone Linking
Power Supply 100–240V AC Ext DC 15V @ 5.3 (included)
Power Consumption 79.5W
Environmental Requirements Humidity: 10% to 90% RH (non-condensing)
Temperature: -13˚F to 185˚F (-25˚C to 85˚C)
Dimensions With brackets: 6.5" x 5.8" x 1.4" (165mm x 147mm x 35mm)
Net Weight 2 lbs (0.85 kg)
Mounting (4) brackets for structured wire cabinet / wall mount
Warranty 2-year limited warranty

 

Download AC-M-120e Spec Sheet

Full Description
Availability: Call for ETA
RRP$ 1,845.00 (Incl. GST)
Unit:
Each
Qty
  • Description

    M⋅120e Four-room Mirage Digital Amplifier

    The M-120e Mirage Digital Amplifier supports four rooms of audio at 30 Watts per zone. Its smaller form factor offers flexibility with placement of the unit, enabling installation into a structured wiring enclosure or wall mounting. The M-120e provides simultaneous amplification for two local source inputs or two eAudioCast™ network streams in as many as 96 rooms.

    Wired with a simple Cat5 connection, the M-120e can be placed throughout the home or accessed wirelessly when used with the MMS-1e Mirage Music Streamer.
    High-resolution Support All eSeries amplifiers support proprietary Autonomic eAudioCast™, enabling high-resolution audio (HRA), up to 24-bit/192kHz, over Ethernet. Place amplifiers, servers, and legacy source components anywhere in a residence and connect all components to the audio network with a single Cat5 cable at high resolution bit depths.
    Installation Flexibility The small form factor, eAudioCast technology, and the included mounting accessories afford installers with maximum flexibility in placement. The M-120e can be mounted on a wall near zone speakers, or in a structured wiring cabinet. Distributed eSeries components stream audio and control signals through the home network using a single Cat-5 connection to a router or switch.
    Virtually Unlimited Zones Multiple eSeries amplifiers can be utilized in any combination on a single network to support up to 96 zones of high-resolution audio with network-wide grouping capabilities.
    Flexible Control Options Control using the Mirage Media Controller application for iOS and Android devices; also, eSeries audio systems are fully compatible with the rich library of pre-programmed control system modules for all major automation platforms.
    Mirage eSeries Ecosystem The Mirage ecosystem is capable of handling up to 144 audio sources and 32 simultaneous eAudioCast streams, including high-resolution audio digital streams and local sources on a single network.
    Rated Output Power, All Channels 15W per channel @ 8Ω load
    Total Harmonic Distortion (THD) < 0.1% (10 Watt, 8Ω load)
    Speaker Impedance (Z1-Z4) 4Ω–8Ω
    Input Sensitivity and Impedance (S1) 0.72V / 22KΩ
    Balanced Audio 0.72V / 680Ω
    Frequency Response 20Hz–20kHz
    Tone Control ±12dB, 100Hz (Bass) ±12dB, 10kHz (Treble)
    Signal-to-noise Ratio 96dB (IHA-A, 1V input / unbalanced)
    Source Outputs (2) local source outputs; Digital Output1 mirrored to Zone1; Digital Output2 mirrored to Zone2; Impedance: 75Ω, 0.5V RMS
    LAN Connection (1) 8-wire RJ45 with 2 LED indicators; 10/100 Mbits/sec BaseT Ethernet port; green LED indicated link status; yellow LED indicated Ethernet activity
    Keypad Controllers (2) KP-6 in-wall keypad controller ports
    Infrared Out (1) IR transmit for control of third-party devices; 3.5mm jack current limited to 25mA
    Zones (4) Zones, expandable to 96 zones with additional supported Mirage amplifiers
    Audio Adjustments Per zone adjustments for Bass, Treble, Balance, Loudness, Audio Delay (up to 600ms), Zone Linking
    Power Supply 100–240V AC Ext DC 15V @ 5.3 (included)
    Power Consumption 79.5W
    Environmental Requirements Humidity: 10% to 90% RH (non-condensing)
    Temperature: -13˚F to 185˚F (-25˚C to 85˚C)
    Dimensions With brackets: 6.5" x 5.8" x 1.4" (165mm x 147mm x 35mm)
    Net Weight 2 lbs (0.85 kg)
    Mounting (4) brackets for structured wire cabinet / wall mount
    Warranty 2-year limited warranty

     

    Download AC-M-120e Spec Sheet

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: AC-M-120E
    Weight: 1.00 KGS
    Shipping: Calculated at Checkout
  • Videos

    Videos