The Mirage M-801e Multi-Room Amplifier is a state-of-the-art, IP controllable, multi-room amplifier with some of the highest performance specifications in its class. Boasting 50 watts per channel into an 8-ohm load, the M-801e has the power to drive higher end architectural or floor standing speakers. Its IP controllability makes it the perfect choice in a controlled environment, and coax and TOSLINK digital connectors on all inputs ensure clean and pure sonic performance in every room.
Use it as a stand-alone, IP controllable distribution amplifier, or pair it with a Mirage Media Server to create a complete whole home audio solution, the Mirage Audio System. The Mirage M-801e is an 8-zone, IP controllable amplifier, expandable to 96 zones, with extensive zone linking capabilities.
Remotely manage and access the web configuration of the Mirage M-801e Multi-Room Amplifier using the Autonomic Dealer Zone Device Manager (available only to authorized Autonomic Dealers).
Touchpanel Display 2.4" color LCD touch panel display for menu guided control
Multi-Zone, Multi-Source Switching 8x8 Matrix Switching, 6 amplified rooms (12ch), 2 pre-amp outputs. The M-801e amplifier can route audio signals from any one of its 8 inputs (analog or digital) into any one or more of its 8 zone outputs under manual control or with IP or RS-232 based automation systems. Zone Linking Zone groups can be created to link multiple zones. Zone linking ties the source selection together across the group. It can optionally coordinate volume and the power state of linked zones. This is useful for closely coupled audio areas where it is advantageous to separate volume levels, but the same audio source, or coordinate the same volume with separate power control. Zone groups appear as a single zone on Mirage Media Server user interfaces. Expandable to 96 Zones The M-801e can be configured in a stack of up to 12 amplifiers (M-401e or M-801e models) and operate under a unified control interface to accommodate large installations without the complexity of coordinating the control of multiple amplifiers. Control and Configuration Web interface and front panel display Front Panel Solid Aluminum External Controls and Indicators Infrared receiver, front blue light when power is supplied. Mounting (2) rack ears included; (4) removable rubber feet included Rated Output Power (FTC)
50W per channel (100W per zone), 8Ω loads Total Harmonic Distortion (THD) 0.1% (40 Watt, 8Ω load) Speaker Impedance (Z1-Z6 L/R) 4Ω–8Ω Input Sensitivity and Impedance
0.72V / 22KΩ (Unbalanced) Coax digital input level and impedance 0.5V ± 0.05V / 75Ω Pre-amplifier Output Level and Impedance (Z7 and Z8 L/R) +16dB / 470Ω Frequency Response 20Hz-20 KHz ± 3dB (8Ω) Tone Control ±12dB, 100Hz (Bass) ±12dB, 10kHz (Treble) Signal-to-Noise Ratio 100dB (IHA-A, 1V input / unbalanced) IR Output (8) 3.5mm Jack: IR1-IR8 current limited to 25mA Source Inputs (8) Digital Coaxial RCA, (6) Analog (L/R) RCA, (2) TOSLINK Ethernet (1) Shielded RJ45 socket, 100Base-T USB (1) USB mini-B female 5-pin Data (1) 4 pole 3.5 mm terminal block connector (Data,12V, IR,0V) Controllers (8) RJ45 sockets Keypad controller ports Zone Triggers and Presets (1) 12 pole 3.5 mm terminal block connector; (Zone trigger 0V out, Zone trigger 1-8 12V out, Common, Preset 1-2 in) Power Supply 110–240V AC 50–60Hz Power Consumption 650W (6W on standby) Dimensions, with feet attached
Height, without feet
4.0" H x 17" W x 15" D (10.2cm x 43.2cm x 38.1cm)
3.5" H (8.9cm); fits 2RU
Weight 16.3 lb. (7.4 kg) Zones (8) zones; expandable to 96 zones by attaching additional
M-801e or M-401e amplifiers
Be the first to
Leave a Review
DetailsCurrent Stock:SKU: AC-M-801EWeight: 10.40 KGSWidth: 54.50 (cm)Height: 20.00 (cm)Depth: 50.00 (cm)Shipping: Calculated at Checkout